Arduino Uno R3 in Pakistan With USB Cable

11 Orders
#C015-01
In stock
 590.00

Description

The Arduino Uno R3 in Pakistan With USB Cable is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

“Uno” means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0. The Uno board and version 1.0 of Arduino Software (IDE) were the reference versions of Arduino, now evolved to newer releases. The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform; for an extensive list of current, past or outdated boards see the Arduino index of boards.

Arduino Uno R3 in Pakistan With USB Cable Specifications:

Microcontroller ATmega328
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 150 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
2 KB (ATmega328) EEPROM
1 KB (ATmega328)
Clock Speed 16 MHz

Arduino Un0 R3 in Pakistan:

The Arduino can be programmed with the (Arduino Software (IDE)). Select “Arduino/Genuino Uno from the Tools > Board menu (according to the microcontroller on your board). For details, see the reference and tutorials.
The ATmega328 on the Arduino/Genuino Uno comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (referenceC header files).

Reviews

There are no reviews yet.

Be the first to review “Arduino Uno R3 in Pakistan With USB Cable”

Your email address will not be published. Required fields are marked *